How to Weave Stainless Steel Wire Mesh? How should the stainless steel wire mesh be woven. Mat mesh twill weave is a weaving method in which each diameter wire crosses through every 2 weft wires, and each weft wire crosses each 2 diameter wires. Dense weaving warp and weft have different wire diameters and different meshes. They are characterized by dense warp and dense weft, thick warp and fine weft. As a Stainless Steel Wire Mesh Supplier, share it with you.To get more news about Stainless Steel Wire Mesh, you can visit resenwiremesh.com official website. The length direction is the warp, and the width direction is the weft. Dense weave mesh is divided into mat-type mesh plain weave and mat-type mesh twill weave. Double-filament Dutch weaving is very similar to twill Dutch weaving. There are two weft threads, which can be closely stacked with the warp threads. This kind of silk cloth is mostly used to filter micron-level filtration. Twill weave is a weaving method in which each warp thread crosses each two weft threads, and each weft thread crosses each two diameter threads. Plain weaving is a weaving method in which each warp thread crosses each weft thread up and down, the diameter thread and the weft thread are the same thickness, and the warp thread and the weft thread form a 90-degree angle. The plain weave mesh is relatively square, and the mesh size is even. Each warp thread crosses each weft thread up and down, the diameter thread and the weft thread are the same thickness, and the warp thread and the weft thread form a 90-degree weaving method.