 ChrisPineson
01 กันยายน 2565 , 20:00:36
The following crusher parts wholesale and crusher manufacturers will talk about which material crusher parts need to be made of?
Before manufacturing crusher parts, the first thing to consider is the hardness and toughness of the crushed materials. Different materials will cause different materials to be used. For example, for hard materials such as granite and basalt, if high-manganese steel is used to cast crusher parts, the expected effect will definitely not be achieved, and the service life is also very short. High-chromium cast iron alloy should be selected as the material for casting. It is suitable for crushing such hard materials.
In addition, it should be noted that the corrosiveness of the crushed material is weak. If it is weakly corrosive, high-manganese steel can be used as the material. During the crushing process, the high-manganese steel can fully work harden, and its wear resistance is also high. It has been exerted to the greatest extent; if it is a material with strong corrosiveness, then high manganese steel is not suitable, and without sufficient work hardening, it will not be in a good state, so it is not recommended to use high manganese steel as material. |
|
